|
Post by fatbloke on Oct 3, 2010 18:49:06 GMT
Hi guys, having a clear out ready for a new bike coming. I thought that i would put the bits on here before they go onto the bay!! 2MG motor, recently shimmed up £200 Metmachex braced swinging arm £175 Stainless Micron downpipes, excellent condition £150 Rear wheel with decent Bridgestone tyre and new bearings £50 CDI £50 Micron end can with a few marks £30 Tank in primer but no filler!! £30 Brand new fibre glass top fairing £80 Brand new small fairing panels £35 New fairing inners (pattern) £25 Seat side panels in primer, no cracks £25 Headlight and fairing frame work £40 Clocks £20 FZ6 calipers, brake upgrade and bolt straight on, mint £55 Alloy bell mouths £40 Carbs £20 Discs £15 Forks, straight and not leaking £20 Front wheel, from a GSXR but with bearings to fit FZ spindle £20
I could deliver locally(ish) and i'm near Lincoln. Otherwise postage is possible too. Let me know if you want anything and i'll get back to you,
Many thanks
Fatbloke
|
|
|
Post by 1ofthe2 on Oct 4, 2010 22:01:53 GMT
Hello - I really need un warped front discs - current ones really bad - are yours OK?
|
|
|
Post by fatbloke on Oct 5, 2010 20:39:06 GMT
Hi
I have whipped the discs off the wheel and had them on the worktop in the kitchen(dont tell her!!) Although not quite 100% there is only a slight deflection and from memory they didn't "pulse" when used. If you are local then by all means come and have a look, just want you to be happy with them if you do buy them. Let me know
Ian
|
|
|
Post by bradbloke on Oct 6, 2010 21:42:07 GMT
hi is there any pitting on the chrome on the forks and do you know what diameter they are brad
|
|
|
Post by fatbloke on Oct 7, 2010 20:45:58 GMT
Hi Brad
There is no pitting on the area of travel on the forks and only a couple of small bits above. I think they are in very good condition. They are 39mm in diameter. Hope thats ok
Fatbloke.
|
|
|
Post by laxmatt on Oct 7, 2010 22:10:51 GMT
do you still have the clocks and would you know if they would fit on a italian import
|
|
|
Post by bradbloke on Oct 8, 2010 15:31:32 GMT
you have a pm
|
|
|
Post by fatbloke on Oct 8, 2010 17:18:13 GMT
Hi there, the clocks should fit the bike but my only worry would be the block connectors? Do any of the other guys on here know? I would think that they would be the same, just don't want to dissapoint anyone,
Fatbloke
|
|
|
Post by Crusty on Nov 17, 2010 18:15:15 GMT
I'm assuming it's an MG headlamp and fairing frame you have?
In which case I'm after one.
Does it include the headlamp?
|
|
|
Post by number6 on Nov 17, 2010 22:36:46 GMT
PM on its way.
|
|