relic
New Member
Posts: 5
|
Post by relic on Jul 3, 2018 12:07:26 GMT
As far as I know they have stopped producing the exhaust system I run one on my cafe racer and it used to have a awful flat spot so I made a restricter in my silencer kept shortening it by 5nm until the flat spot went , bike runs sweet as a nut now
|
|
inthemancave
New Member
Slowly over hauling my FZ and I've got to check the valve clearances .......
Posts: 33
|
Post by inthemancave on Jul 4, 2018 14:48:35 GMT
Hi Relic Did I read it right - you reduced the length of the restrictor you made for the silencer until the engine was happy ? I've got a Micron system on mine, they make good power, but always make the bottom end woolly - I've bitten the bullet and bought an original system to get the seamless delivery the engines are famous for . . probably should've tried a few things first !
|
|
relic
New Member
Posts: 5
|
Post by relic on Jul 5, 2018 11:21:59 GMT
As far as I know they have stopped producing the exhaust system I run one on my cafe racer and it used to have a awful flat spot so I made a restricter in my silencer kept shortening it by 5nm until the flat spot went , bike runs sweet as a nut now
|
|