|
Post by yamglenn on Oct 27, 2020 16:11:20 GMT
I have some pics i had on my computer , one shows some serious side braces that a thunderace/fz The other is a another fz/1002 cc thunderace
|
|
|
Post by 17again on Oct 27, 2020 16:56:12 GMT
looks the first one is from japan. i have seen this buts seems hard to buy as normal from japan.
everything cost a lot too.
|
|
|
Post by yamglenn on Nov 9, 2020 18:21:06 GMT
Hello dude, Your cracking on with your project I can only offer a bit of support here but all the rear footrests i cut off the excess material for the centre stand mounts i cut down as mush as i could. the ignition switch issue its hitting the steering lock point on the frame you may have lose that or can you recess the lock barrel by removing material from the top yolk where it mounts.
just some thoughts
|
|
|
Post by 17again on Nov 11, 2020 18:37:44 GMT
Hello dude, Your cracking on with your project I can only offer a bit of support here but all the rear footrests i cut off the excess material for the centre stand mounts i cut down as mush as i could. the ignition switch issue its hitting the steering lock point on the frame you may have lose that or can you recess the lock barrel by removing material from the top yolk where it mounts. just some thoughts yes i noticed the lock hitting the frame so a shaved it off. still plenty of other problems to fix to. i will try and get some photos added soon. max
|
|