|
Post by akirasan on Jul 27, 2011 11:52:04 GMT
Hi i work at a place that has a plastic dept. I have spoken to the manager and we are looking at producing the 1FN small fairing lowers and the single seat hump.
In about a months time we should have some ready.
Is anyone able to lend me a left hand lower i have the right one. Condition is not important.
How many of you FZ guys would be interested??
|
|
|
Post by Graham on Jul 27, 2011 13:14:12 GMT
Can you be clear as to what you mean by single seat hump? There is the cover which fits over the standard rear part of the seat & there are 2 types of after market single seat units. 1 which follows the lines of the early 1FN side panels & the later 2MG type with slats in each side much like the side panels had/have. There have been a few requests for the early single seat unit on here as I recall. I think I have spare side fairings but they are in a bad way.
|
|
|
Post by akirasan on Jul 27, 2011 14:48:24 GMT
I refer to the original piece that bolted over the passenger seat. I have one of these to copy but need the right hand small lower for a mould.
|
|
doc2x
New Member
Posts: 38
|
Post by doc2x on Jul 27, 2011 17:11:33 GMT
hi there i have the lower that you are after pm me so we can sort some thing out ian
|
|