|
Post by Graham on Dec 4, 2011 18:09:06 GMT
If you have FZ shims available to sell or swap then here would be a good place to mention it.
|
|
|
Post by Crusty on Dec 4, 2011 19:54:44 GMT
160 175 180 (*2) 182
|
|
|
Post by Graham on Dec 4, 2011 21:34:39 GMT
178 x 1 180 x 1 182 x 6 185 x 5 188 x 3 190 x 4 192 x 3 195 x 2 198 x 3 202 x 1 210 x 2
|
|
|
Post by karlvb on Apr 5, 2012 9:03:59 GMT
hi I have read an advert in a magazine that supplies shims not sure if they have fz ones but therre add shows the small bucket type of shims that the fz uses. I think they are called shims australia;If i find my mag i;ll post the address cheers Karl nz
|
|
|
Post by Crusty on Apr 5, 2012 13:57:02 GMT
It's not that difficult to buy shims, it's just that, with 20 in the engine, it can work out quite expensive....
|
|
|
Post by anoldmanreturns on Apr 23, 2012 6:36:06 GMT
160 x 1 165 x 4 180 x 5 182 x 4 188 x 2 190 x 9 195 x 1 198 x 2 200 x 2
|
|
Joken
New Member
Posts: 30
|
Post by Joken on Apr 16, 2014 19:35:54 GMT
Looking for some valve shims I need, 160,162,165,168,170,170,171,, I have available 178,180,198x3, 202x2 Thxs
|
|
|
Post by Crusty on Apr 17, 2014 16:13:29 GMT
I have a 160 and a 170.
You can have them for the cost of postage if I can't use a 1st class stamp on it.
Not sure if there is a 171....
|
|
Joken
New Member
Posts: 30
|
Post by Joken on Apr 17, 2014 20:05:03 GMT
That would be great Crusty..I will send you a pm...I think you are right , most of the shims go up by five..so i will probably have to go the next size...
160,165,165,170,170,170,175 Thxs
|
|
kfz
New Member
Posts: 1
|
Post by kfz on Nov 1, 2017 9:06:59 GMT
I have shims mostlry larger sizes over 180 and want smaller ones around 170. Please help I dontwantto spend £200 to adjust the valves.
Kev
|
|
|
Post by pipes66 on Jan 11, 2018 10:31:14 GMT
I need 170x1,175x2,180x7 I have 190x2,192x3,195x4,198x1 Obviously any help gratefully received. Cheers Pete
|
|