|
Post by karlvb on May 17, 2012 2:02:42 GMT
I have a 1ae engine (3 actually) and was wondering what piston kit would be suitable; I have seen mention of a 911 kit on this forum; can anyone tell me what that is and where to get one? Also are the 2mg conrods stronger than the 1 ae ones thanks
|
|
|
Post by Graham on May 17, 2012 9:54:14 GMT
I believe you will need to have some machining work done to the 1ae crank casings for con rod clearance but the pistons, barrels etc from an FZR1000 Genesis (non exup) are used to increase the FZ's cc. 2mg lump is a straight swap with no machining. Hopefully someone with 1st hand experience will be along with more details but that's the general idea.
|
|
|
Post by scobri on Jun 12, 2012 20:24:37 GMT
I have got a set of brand new in boxes 1AE 0,5mm oversize pistons & rings.make me an offer
|
|
|
Post by fz750horse on Jun 19, 2012 12:21:19 GMT
AFAIK 2mg rods aren't any stronger but they are longer. This was achieved by moving the small end nearer the crown on the 2mg pistons, so you can't mix and match rods and pistons from the two models. I've never done the FZR1000 top end mod but I believe you have to use the longer 2mg rods.
|
|
|
Post by karlvb on Sept 27, 2012 22:51:42 GMT
I have got a set of brand new in boxes 1AE 0,5mm oversize pistons & rings.make me an offer
|
|
|
Post by karlvb on Sept 27, 2012 22:53:09 GMT
Hi Scobri which country are you in; re 1ae pistons cheers Karl vb
|
|