kja
Junior Member
Posts: 86
|
Post by kja on Dec 6, 2012 22:05:53 GMT
Welcome
|
|
|
Post by Crusty on Dec 7, 2012 14:18:37 GMT
Don't thank me yet. Both my brother and I could be wrong.....
|
|
ace
New Member
Posts: 12
|
Post by ace on Dec 26, 2012 8:58:06 GMT
Quick update, added some R6 mirrors
|
|
|
Post by onewicked750 on Jan 11, 2013 4:57:20 GMT
Yeah I ran into this same issue with my 1FN. I found that the left two and right two turn signals are each on their own circuits. So all you need to do is add resistance to one indicator to get the relay to register resistance on the respective circuit. By nature LEDs don't really draw power off a circuit like and incandecent bulb does... soo the relay doesn't really register them, hence the hyper flash or no flash at all. I fixed it by putting the stock indicators back on up front with clear lenses and amber bulbs so they match the clear LED rears. Works awesome, and personally I like the way the stock ones look up front. The bulky rear ones sticking out 6 inches on each side in the back is what bothered me lol. If you want to get those LEDs working though just get the resistors off ebay to put in the circuit, less headache than making ur own, but definitely don't mess with your stock flasher relay, if you get it wrong your bike won't run! lol.
|
|
ace
New Member
Posts: 12
|
Post by ace on Jan 17, 2013 8:23:05 GMT
Yeah you guys are right, i don't have the stock turn signals so i'll get some resistors. The bike isn't in the streets yet cuz lately I've been trying to get a job and it been raining A LOT... Thanks for the tips
|
|
ace
New Member
Posts: 12
|
Post by ace on Feb 6, 2013 18:39:09 GMT
Got today the new speedo cable. And it was a little too long i guess... Is it gonna break this way?
|
|
|
Post by Graham on Feb 6, 2013 21:08:50 GMT
It does look a bit long but I see no reason why it would break. Are you sure you've routed it properly up top? Was it listed as a FZ750 cable when you bought it?
|
|
ace
New Member
Posts: 12
|
Post by ace on Feb 7, 2013 14:32:52 GMT
Yup! Was this one: goo.gl/d5U52Maybe its because the handle bars are 4~5cm lower from the original form?
|
|
ace
New Member
Posts: 12
|
Post by ace on Mar 21, 2013 10:08:50 GMT
I've been kinda busy but today i got the resistors and worked on it... Guess what? it works like a charm ;D
Thanks again Crusty! ;D
|
|