|
Post by welshbanjo on Mar 26, 2015 11:59:37 GMT
|
|
|
Post by Graham on Mar 26, 2015 20:59:37 GMT
They work out at less than £200 even with shipping. I paid £150 for a shitty set of Lazer down pipes many years ago that I still had to weld the crap out of. My German isn't great, do they do a link pipe for them?
|
|
|
Post by welshbanjo on Mar 26, 2015 21:49:16 GMT
i dont know Graham, i used a company in the birmingham/coventry area, i told them the inner dia and outer dia at the collector inc fitting over pipe usually they can only do a 2" long with slots for clamp, you will have to tell them the inside dia and the outer dia to fit over the collector, i got mine in two patrs link pipe to size , then short bend to fit over new link pipe no slots , so it can be welded and a little long than needed so i can cut to length, which fits inside the silencer, measured from that end to center of the bend, then from center of bend to the end of pipe, the angle of the bend is the main issue, i went for 45deg that was wrong so went for 60deg for new link pipe, for orginal link pipe o only needed the 60 deg short bend with right dia internal and outer, not cheapest be they do mandrel bens so no creases,and they polish up well, hope this makes sense , just found the link stores.ebay.co.uk/everyexhaustpartlimited?_trksid=p2047675.l2563
|
|
|
Post by welshbanjo on Mar 26, 2015 21:53:52 GMT
just remembered link pipe had 45 deg bend ans shorter bend to silencer was 60 deg
|
|
|
Post by debelizmaj on Mar 26, 2015 22:14:32 GMT
what do you get if you put this pipes .. ?
|
|
|
Post by welshbanjo on Apr 4, 2015 20:31:05 GMT
empty pockets with ball ache
|
|
|
Post by debelizmaj on Apr 4, 2015 20:45:47 GMT
omg .... do you get sound or more power or just look !?
|
|
|
Post by welshbanjo on Apr 6, 2015 13:08:46 GMT
replacement for original, would need aftermarket silencer / link pipe, it's better made, no rust / no holes,
|
|
|
Post by debelizmaj on Apr 7, 2015 11:50:00 GMT
replacement for original, would need aftermarket silencer / link pipe, it's better made, no rust / no holes, so it will last for a long time ...
|
|