Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 9, 2015 2:56:33 GMT
Hi all I am rebuilding a 1FN . Tge wiring loom is missing the coils and ignitor. I have a complete and working 2mg wiring loom . Can i use this wiring on my 1FN motor and just connect the right side pick up to the ignitor ? Thanks
|
|
|
Post by fz750horse on Oct 23, 2015 7:06:29 GMT
I don't know from personal experience but I think not. I believe the 2mg crank has two webs 180 degrees apart on the rh side of the crank to trigger the pick up coils, the 1fn has one web on each end. I could be wrong though...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 27, 2015 19:40:50 GMT
Thanks for that . I suspected something like that as i had no.luck getting her to run intil i put a 1FN ignitor on it and it fired up immediately. Grant
|
|