mitar
New Member
Posts: 36
|
Post by mitar on May 3, 2016 20:47:38 GMT
Hi all, I take a part carb for cleaning and take out needles from sliders... My carbs have twoo different size of main jets 92.5 on 1 & 4 and 90 and twoo diferent size of needles.Which size needles is outside,bigger or less? I need help to complete carbs,please!
|
|
pkay
Junior Member
Posts: 71
|
Post by pkay on May 10, 2016 3:15:30 GMT
Firstly I'd consult the workshop manual which I just did and it says that they should all be the same size? My manual says that the main jets should be 105. Jet needle is 5CEZ02. As a tip next time use a cupcake baking tin to keep your parts separate - I use one and it helps heaps.
|
|
|
Post by akirasan on May 11, 2016 9:37:55 GMT
From distant memory are the 2mg carbs jetted that way? 1FN different?
|
|
|
Post by fz750horse on May 11, 2016 18:41:00 GMT
2mg carbs had different jets on 1&4 to 2&3 and also different needles. One pair had 5CE6 needles the same as the 1fn, the other pair had weird 'telegraph pole end' needles but I can't remember which way round they were. If you look at a parts diagram, the needles which have the 5CE6 part number are the pointed ones, the other needle number is for the blunt ones. 90/92.5 is very restricted - full power was 102.5/105.
|
|
mitar
New Member
Posts: 36
|
Post by mitar on May 11, 2016 20:01:45 GMT
I put it together,bigger needles on 92,5 on 1&4.Found 4 jets 105 for 10 euros ,onlu need to find needles 5CEZ02
|
|