|
Post by alliekat on Aug 8, 2011 9:01:06 GMT
hello i think this has bee asked before but is the rear wheel off a thunder ace the same as one from an 90 fzr1000 exup ? i need a wheel for my set of wets, exup ones are difficult to find at good prices but thunderace one are cheaper.
|
|
|
Post by JohnRogerOhanlon on Aug 8, 2011 19:53:39 GMT
I would think that they will be the same but why not email someone who is selling one for the specs.?
|
|
|
Post by scobri on Aug 9, 2011 18:30:39 GMT
I think that they are different in that it is more like a YZF wheel than EXUP. The disc is smaller & I think the bearings are different,that means that you will need the caliper & carrier as it is an underslung one.you will end up with two different spec of rear wheel which isn`t good for a quick ish wheel change.
|
|
|
Post by akirasan on Aug 10, 2011 12:03:43 GMT
Hi I believe an XJR 1300 pre 2001 may fit. It is the same spindle so bearing size etc might be the same also the disc is an exact match. Later XJR's have a diff wheel.
|
|
|
Post by alliekat on Aug 10, 2011 17:46:23 GMT
mm interesting, my Fz disc on the rear is exactly the same as the exup one and looking at the thunderace one they look the same the front ones are different, the bearings are no problem to change for different ones, i will order one and if i have to i will modify it to be a straight fit. let you all know if it goes pear shaped. xx
|
|