|
Post by Graham on Nov 26, 2011 0:25:01 GMT
Mine are on top ie above the yoke?
|
|
|
Post by anoldmanreturns on Nov 26, 2011 8:28:57 GMT
could you measure Graham pleeeeez
|
|
|
Post by Crusty on Nov 26, 2011 15:49:09 GMT
I'm a dumbarse, mine are on top as well. But it's at a mates at the mo...
|
|
|
Post by Graham on Nov 26, 2011 16:36:35 GMT
Mine are flush with the fork top for now or maybe 2mm sticking up? They are TRX850 clip ons, FZR600 fork legs & FZR 1000 yoke so probably not much use to you? I will probably drop the front a little if I ever finish the bloody bike.
|
|
|
Post by anoldmanreturns on Nov 27, 2011 14:52:29 GMT
so how deep are the clip ons ?? come on lads I am getting the feeling your all having a laugh at my expense.......... How far do the fork come through the top yolk them? Or for Graham how deep are the clip ons ARGHHHHHHHHHHHHHHHHHHHHHHHHHHHH lol ;D
|
|
|
Post by Crusty on Nov 27, 2011 15:10:01 GMT
Just measured mine and it looks to be dead on 30 mm.
|
|
|
Post by anoldmanreturns on Nov 27, 2011 15:43:56 GMT
is that the clip on or how much the forks stick through
|
|
|
Post by Crusty on Nov 27, 2011 15:49:20 GMT
Both, the forks stick through level to the top of the clip on. The cap on the fork leg sticks up above that.
|
|
|
Post by anoldmanreturns on Nov 27, 2011 16:04:21 GMT
tytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytytyty Thank you
|
|
|
Post by Crusty on Nov 27, 2011 16:11:53 GMT
I would have measured them yesterday but mybike was at a mates having the valve clearances checked....
|
|