|
jets
Mar 26, 2012 17:39:34 GMT
Post by alliekat on Mar 26, 2012 17:39:34 GMT
what type of jets does the fz and fzr use ? are they the normal mikuni slot type, as i am going to order some for the FZR ;D
|
|
|
jets
Mar 26, 2012 21:27:47 GMT
Post by fz750horse on Mar 26, 2012 21:27:47 GMT
Most of the FZ carbs I've stripped had the large Mikuni slot types; one had the smaller ones. Do you know what sizes you need?I've got quite a few in the 105 to 125 range you could have. Good to meet you at Brands today - I got the old girl doing 56s second session this afternoon but the shock started overheating, leading to some unpleasant pogoing, so that was as far as it went
|
|
|
jets
Mar 27, 2012 16:22:10 GMT
Post by alliekat on Mar 27, 2012 16:22:10 GMT
nice to meet you, you did look very smooth and it was only a matter of time till you got to the 56 second mark, what are you going to do about the shock, i have an old exup one you could have. i need 2x105 and 2x107.5, the big ones i think well done let me know if you race at brands would love to see how it does in a race, i might keep my fz and make a track day bike out of it
|
|
|
jets
Mar 27, 2012 20:02:07 GMT
Post by fz750horse on Mar 27, 2012 20:02:07 GMT
I've definitely got some 105s somewhere and I think I've got 107.5s as well. I'm out tomorrow night but I'll have a look on Thursday. The shock is just overdue for a service. I'm going to make a determined effort to finish the new swingarm and then I'll get the shock serviced and set up to work with that. Keep the FZ!
|
|
|
jets
Mar 28, 2012 7:05:09 GMT
Post by fz750horse on Mar 28, 2012 7:05:09 GMT
I remembered where they were this morning. I've got a pair of 105s - let me know your address and I'll put them in an envelope. No 107.5s - sorry
|
|
|
jets
Mar 29, 2012 18:54:08 GMT
Post by alliekat on Mar 29, 2012 18:54:08 GMT
hiya will send a pm about address
|
|
|
jets
Mar 30, 2012 13:30:35 GMT
Post by alliekat on Mar 30, 2012 13:30:35 GMT
hiya will send a pm about address thanks for that just need the 107.5 now , will pop down to wemoto tomorrow and get some
|
|
|
jets
May 28, 2012 5:41:10 GMT
Post by onewicked750 on May 28, 2012 5:41:10 GMT
What is the standard jetting on the FZ? My carbs had 105s all the way across the board from Japan. But when I got the jet kit for the 1000 they recommend 132.5 on the outside carbs and 130s on the insides. And now I see this post about 107.5s on the 750 hmmm...
|
|
|
jets
May 28, 2012 10:50:06 GMT
Post by Graham on May 28, 2012 10:50:06 GMT
Might depend on the market but all my FZ's have both. 2 105's & 2 107.5's.
|
|
|
jets
May 28, 2012 18:11:59 GMT
Post by onewicked750 on May 28, 2012 18:11:59 GMT
the japanese market ones were restricted to 77hp so that may have something to do with it. I'll go ahead and order some 107.5s then! Maybe a new CDI is in order as well.
|
|
|
jets
May 30, 2012 20:50:36 GMT
Post by scobri on May 30, 2012 20:50:36 GMT
what year is your FZ, I might have a CDI box. I have a 2MG rolling chassis which is being stripped for spares
|
|
|
jets
May 31, 2012 5:38:31 GMT
Post by onewicked750 on May 31, 2012 5:38:31 GMT
Mine's an 85
|
|