|
Post by alliekat on May 22, 2013 12:04:58 GMT
i wonder does any one havea set of FZR750 or 1000 forks (not Fz) 87/88. i took the tops off mine to put some progressive springs in and discovered that the caps are crossed threaded and also the adjustment for damping etc is seized solid, so i coudl rebuild ( no garage at the mo) or just get another set and put straight on. think they are the 41mm ones, woudl 2mg ones fit i wonder.
|
|
|
Post by Graham on May 22, 2013 15:57:57 GMT
2MG no good Allie. Thundercat/ace, TRX850, late FZR600, early R6 (I think) all 41mm. Would have to check length & some have less adjustment than others.
|
|
|
Post by onewicked750 on May 22, 2013 18:57:01 GMT
I'm pretty sure I have a set of the 87-88 fork caps in my garage that I don't need... I'll be swinging my garage this weekend so I'll let you kno.
|
|
|
Post by alliekat on May 22, 2013 20:22:39 GMT
yes the fork caps have the big rods going down to the bottom of the forks as they have rebound and preload adjustment, weird set up, any help appreciated
|
|
|
Post by alliekat on May 22, 2013 20:45:05 GMT
thought 2mg were 41mm ? the trx forks would an fzr wheel fit them and gaurd ? i know the calipers are the same
|
|
|
Post by Graham on May 22, 2013 21:33:15 GMT
Mine is 2MG, original forks were 39mm. Don't know about guard but I would guess yes for FZR wheel in TRX forks.. . guess.
|
|
|
Post by alliekat on May 22, 2013 22:09:56 GMT
learn somthing new every day, i had always thought the 2mg were 41 and the 1fn were 39, 1000 exup are 43, and fzr1000 41,
|
|
|
Post by Graham on May 22, 2013 22:54:00 GMT
All FZ forks are 39mm as far as I'm aware. I fitted 1000 Genesis yokes to accommodate my 41mm FZR600 forks.
|
|
|
Post by alliekat on May 23, 2013 7:09:42 GMT
thinking back to when i did mine on the Fz i cant remember but i changed the yokes to fit the EXUP forks, my memory is rubbish... senior moment !!
|
|
|
Post by alliekat on Jul 25, 2013 8:26:50 GMT
I'm pretty sure I have a set of the 87-88 fork caps in my garage that I don't need... I'll be swinging my garage this weekend so I'll let you kno. did you ever find out if you had some FZR (not FZ) fork caps ?
|
|
|
Post by sambuca on Jul 26, 2013 13:46:46 GMT
FZ750= 39MM FZR750-1000=41MM 87/88 FZR EXUP=43MM
|
|
|
Post by tootall on Jul 27, 2013 17:22:56 GMT
I've got a complete fzr1000 front end for sale. 43mm forks. Whole lot is bolted into my fz at the mo and is ready to go. 07949982021 jamie
|
|
|
Post by alliekat on Jul 31, 2013 22:04:30 GMT
probably a bit to much for me.
|
|
|
Post by tootall on Aug 1, 2013 11:42:31 GMT
Try me....
|
|